Kingservo Servo Drive & Servo Motor

KingServo release all new speedy driven high performance AC servo motor and driver.

At present, KingServo release 200W,400W, 750W, 1KW, 1.5KW and with brake servo motor and middle inertia、high inertia servo motor. These can fulfill every machine design purpose, especially electronic industry. Besides, KingServo use high quality CPU which frequency of speed response up to 1KHz. It is easy to accomplish high speed requirement for tool machine and also reduce machine working time. The driver has full closed-loop control which is standard equipment and 2500p/r incremental encoder. It also support a panel to display real time rotary speed、parameters setting、operation test

KingServo Motor Specification

KSMA Unit 01LI 02LI 04LI 08LI 10MI 15MI
Power Facility Capacity KW 0.1 0.2 0.4 0.75 1 1.5
Rated Torque N.m 0.32 0.65 1.3 2.4 4.8 7.20
Maximum Torque N.m 0.96 1.95 3.9 7.2 14.4 21.6
Rated rotation speed rpm 3000 3000 3000 3000 2000 2000
Maximum rotation speed rpm 5000 5000 5000 5000 3000 3000
Rated current A(rms) 1.2 1.6 2.82 4.9 5.2 8
Maximum current A(rms) 3.6 4.8 8.49 14.7 15.6 24
Power rate at continuous speed kW/s 17.07 26.4 56.3 72 19.36 29.47
Moment of inertia Kg.m2 6.00E-06 1.72E-05 3.00E-05 8.00E-05 1.20E-03 1.76E-03
Mechanical constant ms 3.8 5.59 1.71 3.01 16.71 18.05
Axle friction torque N.m 0.032 0.04 0.04 0.05 0.19 0.17
Torque constant N.m/A 0.18 0.41 0.46 0.48 0.92 0.9
Voltage constant V/rpm 23.9 36.7E-3 38E-3 42E-3 84.87 75.78
Electric machinery impedance Ohm 3.9 4.8 2.3 1.1 1.21 0.7
Electric machinery inductive reactance mH 6.4 6.5 6 3.22 7.25 2.2
Electric constant ms 1.64 1.35 2.6 2.9 5.99 3.14
Withstand Vibration   5G


KingServo Driver Specification

 Input Voltage   Main Circuit                   Single Phase/3-phase, 220~255V 50/60Hz 
 Control Circuit   Single Phase, 200~255V 50/60Hz



 Ambient  Temperature   Operating: 0~55 celsius, Storing: -20~+80 celsius (no frosted)
 Ambient Humidity   Operating: 90%RH max, Storing: 90%RH max. (no dewed)
 Elevation   1000m or lower
 Vibration   5.88m/s2 max, 10~60Hz (Not continuous use at resonance frequency)
Control Method

  IGBT PWM sinusoidal wave driven

Encoder Feedback   2500P/r (10000 resoulution) incremental encoder


Control Signal


  11 input with Servo On, Control mode switching, Gain switching/Torque 

  Alarm clear, other inputs vary depending on the control mode


  6 output with Servo alarm, Servo ready, Release signal of external brake

  Zero speed detection, Torque in-limit

 Analog Signal  Input

  3 inputs (A/D)


  2 output (for monitoring)

  Speed monitor: Monitoring of actual motor speed or command speed is enabled

  Torque monitor: Monitoring of torque command, approx..3V/rated torque


Pulse Signal


  4 inputs

  Select the exclusive input for line driver or photo-coupler input with parameter


  4 outputs

  Feed out the encoder pulse (A, B and Z phase)

 Communication Function 

 RS232   1:1 communication to a host with RS232 for parameter setting.
 Front Panel   5 key mode which include "Mode, Set, up,down,left,right" and LED 6 digit
Regeneration   Embedded regeneration resistance (50W)
Dynamic Braking   Set Power Off, Servo Off, Protect Function, stopping dynamic braking 
Control Mode

  Switching among the following 6 mode is enabled

  Position Control, Speed Control, Torque Control,

  Position/Speed Control,Position/Torque,Speed/Torque Control

For more information or to place an order +604-6446028 or use the contact page.

For download Catalog, please login to your account.